CO Contouring enable or disable
Command Command description Controller response Default
mode
(N/A - not available)Service
Mode
(N/A - not available)xCOy Enable binary commands for contouring y=1 - enable, y=0 - disable. - Yes Yes
SYNTAX xCOy, where x - controller (axis) number.
PARAMETER 1 - enable, 0 - disable.
Range 0, 1.
DESCRIPTION The command enables or disables binary commands for fast contouring.
RETURNS none.
REL. COMMANDS none
EXAMPLES: 5 CO0 || 3co 1 || 2345cO 1