DM Set default mode
Command Command description Controller response Default
mode
(N/A - not available)Service
Mode
(N/A - not available)xDMy Set default mode. y - password string, if password is set by PS command, otherwise the parameter is ignored - Yes Yes
SYNTAX xDMy, where x - controller (axis) number.
PARAMETER Password string of about 10 characters. More characters are ignored. The password is preset by PS command.
DESCRIPTION: The command switches the controller to default mode.
Note: If password is lost, the locked controller may be unlocked in 3 steps:
1. Switch into service mode by pressing two top panel (Left and Right) buttons simultaneously for 3-4 seconds.
2. Set a new password by PS command.
3. Unlock the controller by UC command, using the new password.
RETURNS none.
REL. COMMANDS SV, PS
EXAMPLES: 5 DMpassword || 3dmthe_password || 2345Dmdon’t_forget