ON  Switch on the stepper motor current

Command	Command description	Controller response	Default mode (N/A - not available)	Service Mode (N/A - not available)
xON	Switch on the stepper motor current	-	Yes	Yes

SYNTAX    xON, where x controller (axis) number
PARAMETER none.
DESCRIPTION This command is used to switch on the motor current.
Note: if the stepper motor current is switched off, but the sequent motion command is received, the controller performs xON command by default.
RETURNS  none.
REL. COMMANDS xOF
EXAMPLES: 4ON || 1On  || 123 on