PS Set password

Command	Command description	Controller response	Default mode (N/A - not available)	Service Mode (N/A - not available)
xPSy	Set password	If succeeds, returns string: New password is set, or Failed to set password into flash memory, if fails	N/A	Yes

 
SYNTAX  xPSy, where x - controller (axis) number.
PARAMETER Password string of about 10 characters. More characters are ignored.
DESCRIPTION The command sets password character string.
Note: If password is lost, the password may be changed in 2 steps:
1. Switch into service mode by pressing two top panel (Left and Right) buttons simultaneously for 3-4 seconds.
2. Set a new password by PS command.
RETURNS  none.
REL. COMMANDS SV, DM
EXAMPLES: 5 PSpassword     ||   3psthe_password   ||   2345Psdon't_forget