SA Set current Flash memory address (Atmel 24C16)
Command Command description Controller response Default
mode
(N/A - not available)Service
Mode
(N/A - not available)xSAy Set the current flash address for MW command - N/A Yes
SYNTAX xSAy, where x - controller (axis) number.
PARAMETER y is a byte address in flash memory.
Range 0...1999.
DESCRIPTION: The command defines an address for sequential use it by MW command.
Note: MR command also defines the current flash memory address, which is used by MW command.
RETURNS none.
REL. COMMANDS MW, MR
EXAMPLES: 5 SA1000 || 3sa 90 || 2345Sa0