TI Test (get) modem-programmed instruction
Command Command description Controller response Default
mode
(N/A - not available)Service
Mode
(N/A - not available)xTIy Test (get) modem-programmed instruction. y - instruction number See extended command description for details N/A Yes
SYNTAX xTIy, where x - controller (axis) number.
PARAMETER y instruction number.
Range 0...24
DESCRIPTION: The command returns information about the preset instruction.
RETURNS (if the instruction was preprogrammed according Table 1):
Instruction number: 1
Time delay before the instruction is performed: 2
Command value: 1 = send a string and wait for a response string
String to be sent to modem...ATV1
Expected response string...OK
Send string terminating character = <CR>
Next instruction, if modem response = expected response, or modem Ring signal is detected: 3
Next instruction, in case of time-out: 2
Time-out value: 14
REL. COMMANDS PI, TR
EXAMPLES: 5 TI 1 || 3ti0 || 23 Ti 24